Rockhopper SL Pro
Rockhopper SL Pro Specifications
| frame | Specialized M4 fully manipulated alloy frame, fully butted, ORE DT, asymmetrical seat stays, forged dropouts w/ replaceable derailleur hanger, disc only |
|---|---|
| rear shock | |
| fork | Rock Shox Reba SL, Dual Air, 80/100mm travel, 1 piece magnesium lower, 32mm alloy stanchions, alloy steerer, Motion Control damper, rebound adj. w/ LO, disc only |
| headset | 1-1/8" threadless, Campy style semi-cartridge bearings |
| stem | 3D forged alloy, reverse 4-bolt, 7 degree rise, 31.8mm clamp |
| handlebars | Butted alloy riserbar, 25mm rise, 660mm wide, 8 degree back sweep, 6 degree up sweep |
| grips | Specialized Enduro, dual compound Kraton, no flange, 131mm |
| front brake | Avid Elixir 4 hydraulic disc, alloy backed organic pads, 160mm G3 Clean Sweep rotor |
| rear brake | Avid Elixir 4 hydraulic disc, alloy backed organic pads, 160mm G3 Clean Sweep rotor |
| brake levers | Avid Elixir 4 |
| front derailleur | Shimano Deore, 34.9mm clamp, top swing, bottom pull |
| rear derailleur | Shimano RD-M772 Deore XT Shadow, long cage |
| shift levers | Shimano SL-590 Deore trigger |
| cassette | Shimano HG50, 9-speed, 11-34t |
| chain | KMC X9SL w/ reuseable Missing Link |
| crankset | Shimano FC-M532, 2-piece crank |
| chainrings | 44A x 32S x 22S replaceable |
| bottom bracket | Shimano FC-M532, integrated outboard bearing design for 2-piece crank |
| pedals | Alloy body and cage, 9/16" |
| rims | DT-Swiss 445D, 26", alloy double wall disc, pin joint, eyelets, 28h front and 32h rear |
| front hub | Forged alloy, hi/low flange, sealed cartridge bearing, machined disc mount, 28h |
| rear hub | Forged alloy, double sealed cartridge bearing, machined disc mount, cassette, QR, 32h |
| spokes | 2mm (14g) stainless |
| front tire | Specialized Fast Trak LK Control, 26x2.0", 60TPI, tubeless ready aramid bead |
| rear tire | Specialized Fast Trak LK Control, 26x2.0", 60TPI, tubeless ready aramid bead |
| inner tubes | Schraeder valve |
| saddle | Specialized Rockhopper XC, Body Geometry, hollow Cr-Mo rails, 143mm width, front and rear bumpers |
| seatpost | Alloy two bolt, double butted quill, micro adjust, 30.9mm |
| seat binder | Forged alloy QR, brass washer |
| notes | Chain stay protector, reflectors, clear coat, owners manual |
*** Specifications subject to change without notice.